• OIL BASED
• Covercoats
  - 440 TC (Thixo-clear)
  - 440 C (Clear)
  - 444 Y (yellow)
  - 440 Y (Yellow)
• Mediums
  - 25810 (Thixo Medium)
  - 25450 (Oil Medium)
  - 25032 (Balsam)
  
• Cleaning Oil
  - 25216
  

• WATER BASED
• Water Media
  - P 571 (Vehicle)
  - P 526 (Underglaze media)
  - P 520 (Underglaze media)
  - P 533 (Painting media)
• Glaze Binders
  - CM 135
  - CM 138
  
  

The 25810 is an indirect screen printing (transfers) medium characterized by a light thixotropy. Due to the excellent burning properties, 25810 can be used for all applications to glass, enamel, ceramic and porcelain. By reason of balanced printing characteristics for the printing of area, line and halftones dots with high sharpness. Furthermore, 25810 is suitable for heat release transfers with application with the covercoat 440 Y.

Water-Based Brush Banding Media
This product has been developed to give application properties which are equal to those normally associated with oil-based media together with the advantages of working in a water based system.

Dispersion of the colour in the medium is best achieved using a triple-roll mill and the resulting paste thinned with water. The product is suitable for use with both overglaze and underglaze colours.

Typical Properties

This product has been special developed, suitable for mixing with underglaze powder for banding and painting on bisques. The recommended mixing ratio will give a slow drying to allow extended working time, make it smooth painting and colours are not to be overlapped or superimposed. After drying about 3-4 hours, the colours will "hardened on" and obtain good absorption of glazing. The media can be easily burnt out in the early stage of firing without residue, remaining only the designed colours.

Typical Properties

Description:
CM 138 is a modified polymer of acrylate-copolymer use as binder for ceramic glazes. The remarkable advantages resulting from the product utilization are the following:
      - Improved the glaze better leveling and fixing to the body
      - During dipping slip-glaze will not be easily settling in the bottom and prevent hard sediment
      - Defoamer aid added and better dispersing
      - Reduces the mill base viscosity
      - Biocide is added and clean burning out

Use:
The product is mostly added in the mill 0.1-0.5% based on the dry weight of the glaze or it can be added after let down.

Packing: container size 25 kgs.

Amarin Ceramics Corp.,Ltd.
Phone: (662) 294-0054
Fax: (662) 294-6415
Email: info@amarinceramics.com

[ Top of Page ]